VPortPro 2.2
VPortPro Client, included in the VPortPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on virtual serial ports of your PC (i.
VPortPro Client, included in the VPortPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on virtual serial ports of your PC (i.e., VPortPro Client can create virtual serial ports on your PC and redirect them to remote TCP/IP ports and vice versa).
VPortPro Client can also be used to pass serial data across a corporate intranet or over the Internet (using the Telnet protocol (with the features provided by the COM Port Control protocol specified by IETF RFC 2217) and the raw TCP connection protocol as well).
The COM Port Control protocol specified by IETF RFC 2217 can also be used for any serial device attached to an access server. Such devices could be: serial printers, plotters, monitoring devices: pipe line monitors or medical monitors, general office equipment such as photo-copiers and cash registers.
The Assistant Server is a software program designed to convert serial (RS232) data to the TCP/IP packets format and TCP/IP packets to serial data. While running on your PC, Assistant Server can receive serial data from a serial port of your PC and then send them out to a TCP/IP network through a TCP/IP socket connection on your PC. Assistant Server can also receive serial data from a TCP/IP network through a TCP/IP socket connection on your PC and send them to a serial port on your PC.
VPortPro features
The VPortPro Client is a software program designed to convert serial (RS232) data to the TCP/IP packets format and TCP/IP packets to serial data. While running on your PC, VPortPro Client can receive serial data from a serial port of your PC and then send them out to a TCP/IP network through a TCP/IP socket connection on your PC. VPortPro Client can also receive serial data from a TCP/IP network through a TCP/IP socket connection on your PC and send them to a serial port on your PC.
VPortPro Client supports two transport data stream protocols:
Raw TCP
Telnet (with the features provided by the COM Port Control protocol specified by IETF RFC-2217)
VPortPro Client functions as a TCP/IP client (for both the protocols), i.e. it will initiate and establish connection with remote systems (by sending connection requests), and then communicate with connected TCP/IP servers. As a TCP/IP client, VPortPro Client allows to establish connection to a single TCP/IP server for each serial port. Normally any data received through the TCP/IP port that it connects to will be transmitted out the serial port and any data received through the serial port will be sent back to the TCP/IP server. This enables fully bi-directional communications. So, VPortPro Client redirects COM port to a TCP/IP port and vice versa.
Also with VPortPro Client, you can create "virtual serial ports". A virtual serial port (VSP) appears to application software as a "standard" MS Window's communications port (virtually identical to an RS-232 port). Data may be written to VSP by applications, and data may be read from VSP as though it were a standard COM port. You can configure VPortPro Client to map TCP/IP ports onto virtual serial ports. This allows MS Windows applications to generate or consume data to and from VSP as though the data were being processed by physical hardware.
While you are using VPortPro Client, you can:
Configure COM-TCP/IP connection channels (i.e., make COM and TCP/IP settings for a connection channel)
Manage the connection channels list (i.e., Add/Delete connection channels)
Watch connection channels activity (i.e., status)
Monitor data logging for a selected connection channel from the list
Trace the VPortPro Client session using a variety of trace flags
Currently, VPortPro Client supports only its own virtual serial ports (i.e. only those it creates by itself). VPortPro Client does not support physical serial ports and virtual serial ports created by other software tools.
Currently, VPortPro Client cannot redirect a serial port to more than one remote TCP/IP port, and a remote TCP/IP port to more than one serial port.
The Assistant Server is a software program designed to convert serial (RS232) data to the TCP/IP packets format and TCP/IP packets to serial data. While running on your PC, Assistant Server can receive serial data from a serial port of your PC and then send them out to a TCP/IP network through a TCP/IP socket connection on your PC. Assistant Server can also receive serial data from a TCP/IP network through a TCP/IP socket connection on your PC and send them to a serial port on your PC.
Assistant Server is intended primarily for debugging purposes of COM-TCP/IP connection channels by emulating serial servers.
Assistant Server supports two transport data stream protocols:
Raw TCP
Telnet (with the features provided by the COM Port Control protocol specified by IETF RFC-2217)
Assistant Server functions as a TCP/IP server (for both the protocols), i.e. it will wait for remote TCP/IP clients' connection requests to TCP/IP ports you specified (as listening on your PC) to establish connection with remote systems, and then to communicate with connected TCP/IP clients. As a TCP/IP server, Assistant Server allows to accept only a single client connection to a TCP/IP port. Incoming data received from a TCP/IP client is transmitted out a serial port as it is received. Incoming serial data is sent to a connected TCP/IP client. This enables fully bi-directional communications. So, Assistant Server redirects COM port to a TCP/IP port and vice versa.
You can configure Assistant Server to map TCP/IP Ports onto virtual serial ports as well as to physical COM ports. This allows MS Windows applications to generate or consume data to and from VSP as though the data were being processed by physical hardware.
While you are using Assistant Server, you can:
Configure COM-TCP/IP connection channels (i.e., make COM and TCP/IP settings for a connection channel)
Manage the connection channels list (i.e., Add/Remove connection channels)
Trace the Assistant Server session
Currently, Assistant Server support
s physical serial ports and virtual serial ports created by VPortPro Client or other software tools.
The configuration utility, ComSetup, allows you to make communication settings relating to the networking aspects of VPortPro that operate with the TCP/IP transport interface.
tags
vportpro client assistant server serial port serial data serial ports virtual serial connection channels com port data from network through send them the tcp receive serial
Download VPortPro 2.2
Download VPortPro 2.2
Purchase: 
Buy VPortPro 2.2
Similar software
VPortPro 2.2
Labtam Inc.
VPortPro Client, included in the VPortPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on virtual serial ports of your PC (i.
ReMapPro 2.7
Labtam Inc.
The main utility, the Comport, is included in the ReMapPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on serial ports on your PC.
TCP-Com 4.1.4
TAL Technologies Inc
TCP-Com is a software based RS232 to TCP/IP converter.
RS232 Hex Com Tool 6.0
Virtual Integrated Design
RS232 Hex Com Tool is a useful and reliable serial software terminal program which can be used to communicate with just about any rs232 peripheral.
RS232 Stealth Monitor 1.0
Virtual Integrated Design
RS232 Stealth Monitor is a useful utility that shows serial data transmitted and received from an rs232 com port on the same pc with no extra hardware!
View and log RS232 data in Hex or Ascii mode.
AccessPort 1.33
WWW.SUDT.COM
AccessPort - RS232 Monitor / RS232 Terminal AccessPort is an advanced serial monitor, simulation and RS232 data analysis application.
MarshallSoft GPS Component for eVC 1.2
MarshallSoft Computing
Win/CE GPS client library component reads and decodes standard GPS NMEA 183 sentences from the RS232 serial port as well as compute great circle distances and bearings.
Pira CZ Remote COM Port 1.1a
Jan Kolar
Pira CZ Remote COM Port is a simple program that allows you to control any RS232 device via TCP/IP network (LAN, internet).
Docklight RS232 Terminal - RS232 Monitor 2.2.8
Flachmann und Heggelbacher
Docklight is a test, analysis and simulation tool for serial communication protocols (RS232, RS485/422 and others).
TCP-File 1.5
Fog Software, Inc.
TCP-File logs data received from any kind of equipment that has a TCP/IP address (for example, Cisco router).
120.00 
Demo
0K
Windows Vista 
RSS