NTRecover 1.0r

NTRecover 1.0r Screenshot Finally, the utility that NT system administrators have been waiting for.

Developer:   Mark Russinovich
      software by Mark Russinovich →
Price:  0.00
License:   Freeware
File size:   0K
Language:   
OS:   Windows Vista (?)
Rating:   0 /5 (0 votes)

Finally, the utility that NT system administrators have been waiting for. With NTRecover you can access a dead x86 NT system's disks from a good system over a serial connection. You can then salvage data off of the drives using native NT commands and utilities. With the write-version you can even run chkdsk on the dead system's drives! The read-only version is freeware.

NTRecover is an advanced Windows NT dead-system recovery utility for x86 NT installations. Using NTRecover, NT machines that fail to boot because of data corruption, improperly installed software or hardware, or faulty configuration, can be accessed and recovered using standard administrative tools, as if the machine were up and running. Using an adjacent NT-based computer connected by a serial cable, NTRecover allows an administrator to:

Copy files between the non-booting system and the working NT system.
Edit or delete files that may be preventing the system from booting.
Run virus detection and removal programs.
Repair damaged filesystem structures using chkdsk.
NTRecover consists of host and client software, where the host software runs on a "good" NT 3.51 or 4.0 system, and the client software executes on a "dead" system in need of repair. The "dead" system is booted off a floppy disk directly to the NTRecover program, so repair is possible even when basic startup code in NT, such as NTLDR, fails. The host and client machines are connected with a standard null-modem serial cable.

The NTRecover host software creates virtual disk drives on the host machine that represent the drives present on the client computer. When native NT file systems, such as NTFS and FAT, access the drives, NTRecover manages communications over the serial cable to the client software to transfer disk data back and forth between the two machines. As far as Windows NT on the host machine is concerned, the drives created by NTRecover are indistinguishable from the local drives present on the host, and so they can be manipulated with Windows NT disk utilties, including high-level tools like the Windows NT Explorer, and low-level tools such as chkdsk.

Be sure to check out Remote Recover, which provides you all the capabilities of NTRecover except that it works over TCP/IP LAN/WANs instead of a serial cable. Remote Recover is ideal for high-speed backup/restore/repair, especially when large amounts of data are involved.

NTRecover is a program designed to repair drives that are inacessible due to misconfigured or missing software. It is not meant for drives that have been physically damaged or with substantial destruction of on-disk data.

Requirements
  • NTRecover can access drives accessible using the Int 13 interface. This includes IDE drives and most SCSI drives (Int 13 based drives are also those supported by disk utilities such as PowerQuest's Partition Magic). If you are unsure whether a given drive is supported, try running FDISK /STATUS from DOS. If FDISK can read the drive correctly then NTRecover should be able to as well.

    tags the host  serial cable  the drives  dead system  client software  the client  host and  you can  host machine  the ntrecover  level tools  drives that  remote recover  

    NTRecover 1.0r screenshot


    Download NTRecover 1.0r

     Download NTRecover 1.0r


    Similar software

    NTRecover 1.0r NTRecover 1.0r
    Mark Russinovich

    Finally, the utility that NT system administrators have been waiting for.

    Remote Recover 2.0 Remote Recover 2.0
    Mark Russinovich

    Remote Recover is an advanced Windows NT dead-system recovery utility for Windows NT/2000/XP installations.

    REMOTE DRiVE 1.1 REMOTE DRiVE 1.1
    MATCODE Software

    REMOTE DRiVE is the Emergency-Access tool No.

    Double Image 5.00.0033 Double Image 5.00.0033
    Host Interface International

    Double Image is a useful software that allows you to copy data files to and from local, external, LAN, WAN, NAS drives -- any drive that Windows recognizes, including mapped drives and other network locations.

    FAT32 for Windows NT 4.0 1.06 FAT32 for Windows NT 4.0 1.06
    Mark Russinovich

    Another first from Sysinternals: a FAT32 file system driver for NT 4.

    iDriveRepair 4.2 iDriveRepair 4.2
    BinaryBiz

    iDriveRepair is a powerful utility for remote hard drive repair (Internet-based repair).

    XtraTools 2007 9.0 XtraTools 2007 9.0
    WinTools Software Engineering

    XtraTools 2007 is a very useful and powerful set of applications consisting of more than 20 independent system utilities that are complimentary to the standard MS Windows utilities.

    ComPort/IP Client 2.2 ComPort/IP Client 2.2
    Fog Software, Inc.

    ComPort/IP Client is an application that connects to a remote host where either Terminal Server or ComPort/IP Server is running, collects data from a TCP/IP port of a remote computer and sends it to serial port(s) of a local computer.

    NTFSCHK 1.0 NTFSCHK 1.0
    Mark Russinovich

    If you're a Windows NT user and are experimenting with Windows 2000 then you almost certainly set up a dual-boot environment.

    Drive Blocker 2.0.0 Drive Blocker 2.0.0
    Leithauser Research

    Drive Blocker block removable drives to prevent people from using any removable drives or media Drive Blocker is a software program for Windows XP computers that allows your computer to , such as flash drives (sometimes called thumb drives), CD's, or floppy drives on your computer.