Bus Hound 5.04
Bus Hound is the first software bus analyzer that can capture I/O, protocol, and performance measurements.
Bus Hound is the first software bus analyzer that can capture I/O, protocol, and performance measurements. You can also send your own custom commands from a graphical interface. Because Bus Hound is a 100% software product, it is especially suited to inspecting host side protocol.
Bus Hound features
Captures megabytes of I/O at a time. The capture depth can be set starting from 1K up to available system RAM in 1K increments.
Use Smart Triggers to stop the capture process upon a high level condition such as "no media" or "not ready". You can also specify a text or hex data pattern to trigger on.
Build and submit commands including bus and device resets. For SCSI and ATAPI devices, you can send CDB's. For IDE devices, you can send ATA task file commands. For USB devices, you can send control, bulk, interrupt, or isochronous transfers as well as simulate hot plug. For FireWire devices, asynchronous transfers can be performed. You can also access any device at the hardware I/O Port level. The data transfer results can be saved to a binary file.
Capture device driver packets including IRP's, URB's, IRB's, SRB's, IOR's, and SCSI pass through.
Merge repeated identical commands. Especially useful for compacting captures where a device is polled with the same command repeatedly.
Display device properties such as the device serial number, hardware id, USB endpoints, bus power, bus speed, and FireWire node.
Measures device performance. View individual read, write, and isochronous performance along with the total amount of data transferred of each.
Display what device driver submitted each command.
I/O from multiple devices can be captured simultaneously, even if devices are attached to different buses.
There is no limit on how many machines can run the product in parallel.
The system startup process can be captured, allowing capture of the very first commands sent to a device.
In addition to command and data transfers, low-level protocol is captured such as operating system status and sense data. This information can be used to efficiently trouble shoot device driver or firmware issues.
Microsecond resolution timing is captured. This allows the time between commands to be measured as well as the elapsed time of a single command.
Captured data can be viewed in real time, dragged and dropped to other applications, or saved to a text or zip file.
When the capture buffer fills to capacity, Bus Hound can be configured to stop the capture process or continue capturing, keeping the most recent acquired data.
The capture depth of each individual I/O phase can be configured from 1 byte up to 2GB in 1-byte increments. For instance, if the capture depth is set to 8 bytes, only the first 8 bytes of each packet will be captured.
Log the system date and time of when each phase occurred.
A simple web-like interface. Devices are selected simply by placing a checkmark next to them in a graphical tree.
Limitations
It captures up to 32 commands
It captures only the first 8 bytes of each data transfer
tags
the capture you can bus hound devices you can send device driver capture depth the first can also devices are the system only the capture process
Download Bus Hound 5.04
Download Bus Hound 5.04
Purchase: Buy Bus Hound 5.04
Similar software
Bus Hound 5.04
Perisoft
Bus Hound is the first software bus analyzer that can capture I/O, protocol, and performance measurements.
Advanced USB Port Monitor 2.7.2.307
AGG Software
Advanced USB Port Monitor is a USB Bus, USB Device and Protocol Analyzer.
DeviceFilter 2.2.0.44
NT Kernel Resources
DevFilter is a universal software bus analyzer for capturing device I/O that allows you to monitor all I/O request packets (IRP's) on your system, fast I/O requests and capture each request input and output data.
USBlyzer .0 Beta 1
usblyzer.com
USBlyzer is an easy to use software USB protocol analyzer for Windows, which provides a complete yet simple to understand view for analyzing USB Host Controllers, USB Hubs and USB Devices activity.
Serial Monitor 4.10
HHD Software
Serial Monitor is a serial port monitor, Rs232 sniffer, with protocol analyzer and packet data logger.
JComm Serial Communications Application 1.01
Scott Harrison
JComm is created to capture data from the serial port of your PC, tokenize the data and then export the data into a text file with user defined delimiters.
DISCInfo 1.6.1
Hijacker
DISCInfo is a program to display hardware informations from and IDE/SCSI device under Windows operating system.
Visage PC Surveillance 2.4 Build 73
REALCODE Development
VISAGE captures all user activities on a PC.
CyE Router AP Switch Configurator Command Line Mode 5 1.0.0.5
CyE CORP.
CyE Router AP Switch Configurator Command Line Mode lets you generate commands for Cisco devices, such as: Routers, Access Points and Switches using command line mode.
Portmon 3.02
Mark Russinovich
Portmon is an application which monitors and displays all serial and parallel port activity on a system.